
£537.00
Pack Size: EACH
» More Equipment Products
» More Block heaters Products
» More Accessories Products
» More Products by Techne
|
DB-2A |
Temp. Range |
25 - 100°C |
Temp. stability @ 40°C |
±0.05ºC |
Temp. stability @ 100°C |
±0.1ºC |
Temp. Setting |
Rotary graduated dial |
Temp. Display |
No |
Max. temp. variation between identical blocks at 40°C |
0.2ºC |
Set point accuracy |
±2ºC |
Max. No. blocks |
2 |
Heat up time, 30 - 37ºC |
8 min |
Heat up time, 30 - 56ºC |
9 min |
Heat up time, 30 - max ºC |
12 min |
Size L x W x H (mm) |
202x260x105 |
Net weight |
3.5kg |
Dri-Block® heater. 25 - 100ºC analogue
Techne Dri-Block® heaters are the economical answer to every laboratory\'s need for a compact constant temperature heater suitable for test tubes, cuvettes, microcentrifuge tubes, 96 well plates and other small containers.
Dri-Blocks are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and other general uses. They are also used for a variety of industrial applications.
Dri-Block® heater units have a recessed chamber to hold interchangeable insert blocks which must be purchased separately. Heat up rate on all units is rapid. Independent lights indicate mains power, heater action and over-temperature conditions are incorporated and an on/off switch is mounted on the rear panel.
The units are light in weight and have extremely efficient insulation to ensure that the case remains cool enough to handle even at maximum operating temperatures.
All Techne products are designed and manufactured under BS EN ISO 9001:1994. They conform to the EMC and low voltage directives and all important RF interference and electrical safety regulations.
All units are 120/230V 50 -60 Hz